Cliftons of Wrexham Ltd Telephone Number
Your cart is empty

Frequently Asked Questions

Product Questions

Q. How do I calculate the running costs of a gas fire or gas stove?

A. To work out the running costs, simply multiply the gas consumption figures (heat inputs) by the cost per kWh given on your gas bill.

Q. How do I work out the efficiency of a gas fire or gas stove?

A. Simply divide the maximum heat output by the maximum gas consumption (heat input).

Q. Should I wait for goods to arrive before commencing any building work?

A. Firstly, we would always recommend that you should have a survey carried out by a Gas Safe registered gas installer, or qualified NICEIC electrician (whichever is applicable to the goods you intend to purchase) to check and certify the compatibility of your chimney, flue, property and or circumstances prior to purchase to avoid disappointment. We would also recommend that you should wait until you have the goods purchased, on site, in your possession to take accurate measurements from before proceeding to carry out any building work or create any apertures in the wall to avoid potential costly mistakes being made, as manufacturers reserve the right to alter products or specifications without any prior notice as required.

Q. Do I need to have my fire serviced regularly?

A. The Health and Safety Executive, Gas Safe, and Manufacturers of gas appliances strongly recommend they be serviced every 12 months.

Q. How do I decide which gas fire to buy to heat my room?

A. As a rough guide only, measure the room and multiply the height x width x depth (in metres), and divide this by 14 and it will provide you with the average heating requirements for the room in KW's. Although this method is dependant on the number of windows, construction, insulation, furnishings and any double glazing in the room. We therefore strongly recommend that all gas or electric fires shown on our website be used as a supplementary form of heating and not as a sole source of heat in any room.

Q. If I don't have mains gas can I still have a gas fire?

A. Yes you can. Most of the manufacturers products we offer are available to run on liquefied petroleum gas (LPG), a gas supplied in either bottle or storage tank form kept outside in the garden and filled up when required by a local supplier.

Q. What's the difference between "outset" and "inset" gas fires?

A. Outset fires sit on the hearth outside of the fireplace opening and inset fires sit inside the fireplace opening just behind the hearth.

Q. What type of control facility do you offer for operating gas or electric fires?

A. We offer a choice of control features on gas fires from different manufacturers from kneeling down to operate the fire manually, standing upright close to the fire using a top slide control or state of the art remote control operated from the comfort of your armchair. With electric fires there is a choice of either manual control whilst standing upright or hand held remote control dependant on the manufacturer of the fire.

Q. Are living flame gas fires expensive to run and will all the heat go up the chimney?

A. Significant improvements have been made with regard to this type of fire since its inception many years ago. Today living flame gas fires are far more efficient than they used to be with lower running costs and improved heat outputs into the room than ever before. Although some gas fires may be more efficient and provide more heat than others dependant on whether they have a convector or heat exchanger built into the fire.

Q. Can I have a hole in the wall gas fire installed without a hearth?

A. Yes there are certain manufacturers of gas fires that have had their appliances specifically tested and approved to be installed without the requirement of installing a floor mounted hearth. However strict installation guide lines must be adhered to including minimum distances from the floor which may vary from manufacturer to manufacturer. We therefore strongly advise that you check the technical requirements for installation of any such appliances in detail before proceeding to purchase them from our website.

Q. What is the average size of fireplace opening required to install an inset gas or electric fire?

A. The most common size of fireplace openings in the UK is 16" wide x 22" high. Most gas and electric fires are designed to fit into this size of fireplace opening subject to any depth restrictions.

Q. Do gas fires produce any soot and if so how can I clean my fire?

A. Most gas fires with a fuel effect be it coals, pebbles, logs or driftwood will produce some levels of carbon soot over time which is produced when the flame impinges on the fuel of the fire i.e. the coals. The best way to clean the fuel is to lay it all out on a piece of paper, then gently take each piece and softly brush it over with a clean, dry, paint brush. This will remove most surface layers of soot, then simply consult your instruction manual for the appliance which should show you how to re-lay the fuel on your fire. Please note fuels like pebbles or beige coloured firebacks on fires which are light in colour will show up soot deposits more easily and sooner than that of a coal effect fire with a black background. This may be something you want to consider before making any purchase from our website.

Q. What is an oxygen depletion system or (ODS) on a gas fire?

A. Most modern gas appliances are fitted with an (ODS) oxygen depletion sensor also known as an (ASD) atmosphere sensing device or oxypilot. These monitor the oxygen levels in a rooms atmosphere and shuts off the gas to the burner in the event of the flue becoming blocked or if there is poor ventilation.

Q. Do I need to fit an air vent in my room with a gas fire?

A. The need for an airvent will depend on the amount of gas the appliance uses i.e. the maximum Kilowatt heat input figure, size of room and size of fire opening. Although whilst there are a lot of gas appliances that are under 7Kw heat input which do not require a vent, we strongly recommend that you consult the technical details of the specific appliance you require before purchasing it from this website.

Q. How much does an electric fire cost to run?

A. Based on electricity costing approximately 6.5 pence per kilowatt-hour, with the heater on it will cost around 1.3 pence per hour. Although if you just have the flame effect turned on it would be between 0.5 and 0.9 pence per hour. These figures are supplied only as a guide and are subject to change at any time based on a mains supply with quarterly bill.

Q. How long is the cable on an electric fire?

A. Most electric fires come with a 2 metre length cable with a moulded plug on the end. If a longer cable is required then you will need the services of a qualified electrician and under no circumstances should you attempt to extend the standard cable supplied.

General Questions

Q. Could you send me brochures on your products?

A. Unfortunately due to the vast range of products we offer and the sheer number of enquiries we receive daily it is not practical for us to send you brochures. Please contact manufacturers
Q. Do you have a secure server?

A. We have a secure payment environment where your credit/debit card transaction is fully protected.

Q. What happens if my order is declined when I enter my details?

A. One of the most common reasons may be that your billing address does not match your details held with your credit/debit card company. Please check that your billing address is the same as the one shown on your statements. If you are still experiencing problems you can either speak to your card company or email our sales team.

Q. What is my security pin code?

A. Your security pin code is the last 3 digits on the reverse of your credit/debit card on the signature strip which is unique to you.

Q. What is an issue number?

A. Your issue number is on the front of your debit card which you will be asked to insert when proceeding with your order on our secure payment section.